Pazzo69
08-03-2013, 20:29
Salve ragazzi vi scrivo perché da un mese a questa parte ho un fastidiossisimo problema, una schermata blu.
Io uso il pc per il gaming, pc assemblato, e uso il joistick della ps3 collegato tramite porta usb, e proprio quando lo collego al pc, A VOLTE, non sempre, mi va in crash e per un secondo appare la schermata blu e poi il pc si riavvia
Sono quasi sicuro che sia un problema di driver, forse proprio del joistick? queste le caratteristiche del pc, se possono servire:
Windows 7 64 bit SP1;
processore i5-3570k 3.40ghz
scheda video gtx 670;
RAM 16gb
SSD 128gb (dove è installato il SO)
HD 1tb
Scheda madre asus p8z77-v pro
Comunque ho scaricato il programma "WhoCrashed" e ho fatto una copia del dump e mi è uscito questo:
Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Tue 05/03/2013 17:53:46 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030513-6302-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x53B46)
Bugcheck code: 0x10D (0x5, 0x0, 0x1202, 0xFFFFFA800D21AA60)
Error: WDF_VIOLATION
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Runtime framework driver modalità kernel
Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Tue 05/03/2013 17:37:53 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030513-6255-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x53B46)
Bugcheck code: 0x10D (0x5, 0x0, 0x1202, 0xFFFFFA8010D11680)
Error: WDF_VIOLATION
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Runtime framework driver modalità kernel
Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Tue 05/03/2013 17:35:15 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030513-6474-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x53B46)
Bugcheck code: 0x10D (0x5, 0x0, 0x1202, 0xFFFFFA801253D820)
Error: WDF_VIOLATION
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Runtime framework driver modalità kernel
Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
Conclusion
3 crash dumps have been found and analyzed. No offending third party drivers have been found. Consider configuring your system to produce a full memory dump for better analysis.
Read the topic general suggestions for troubleshooting system crashes for more information.
Note that it's not always possible to state with certainty whether a reported driver is actually responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.
Da quel che si legge è sempre lo stesso file, almeno mi sembra di capire, che causa il crash, qualcuno puo darmi una mano?
Grazie a tutti ;)
PS: Vorrei sottolineare che la schermata appare solo quando collego il joistick per il resto il pc va benissimo!
PPS: se puo darvi una mano davanti ho 4 prese usb 2, 2.0 e 2, 3.0. Una volta mi è capitato un fatto strano, stavo passando dei file su un HDD esterno e ad un certo punto, il processo si è interrotto e non mi ha piu riconosciuto l hdd, anzi, non mi funzionava piu nessuna porta! poi riavviando e cercando di reinstallare driver mi sono tornate a funzionare solo due porte una 2.0 e una 3.0, poi poco tempo fa dopo l ennessima schermata blu e altri driver reinstallati tutte le porte hanno ripreso a funzionare, solo che la schermata ancora, a volte, si ripresenta!
PPPS: spero di non aver sbagliato sezione e mi scuso se mi sono dilungato un po troppo :)
Io uso il pc per il gaming, pc assemblato, e uso il joistick della ps3 collegato tramite porta usb, e proprio quando lo collego al pc, A VOLTE, non sempre, mi va in crash e per un secondo appare la schermata blu e poi il pc si riavvia
Sono quasi sicuro che sia un problema di driver, forse proprio del joistick? queste le caratteristiche del pc, se possono servire:
Windows 7 64 bit SP1;
processore i5-3570k 3.40ghz
scheda video gtx 670;
RAM 16gb
SSD 128gb (dove è installato il SO)
HD 1tb
Scheda madre asus p8z77-v pro
Comunque ho scaricato il programma "WhoCrashed" e ho fatto una copia del dump e mi è uscito questo:
Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Tue 05/03/2013 17:53:46 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030513-6302-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x53B46)
Bugcheck code: 0x10D (0x5, 0x0, 0x1202, 0xFFFFFA800D21AA60)
Error: WDF_VIOLATION
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Runtime framework driver modalità kernel
Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Tue 05/03/2013 17:37:53 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030513-6255-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x53B46)
Bugcheck code: 0x10D (0x5, 0x0, 0x1202, 0xFFFFFA8010D11680)
Error: WDF_VIOLATION
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Runtime framework driver modalità kernel
Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Tue 05/03/2013 17:35:15 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030513-6474-01.dmp
This was probably caused by the following module: wdf01000.sys (Wdf01000+0x53B46)
Bugcheck code: 0x10D (0x5, 0x0, 0x1202, 0xFFFFFA801253D820)
Error: WDF_VIOLATION
file path: C:\Windows\system32\drivers\wdf01000.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Runtime framework driver modalità kernel
Bug check description: This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
Conclusion
3 crash dumps have been found and analyzed. No offending third party drivers have been found. Consider configuring your system to produce a full memory dump for better analysis.
Read the topic general suggestions for troubleshooting system crashes for more information.
Note that it's not always possible to state with certainty whether a reported driver is actually responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.
Da quel che si legge è sempre lo stesso file, almeno mi sembra di capire, che causa il crash, qualcuno puo darmi una mano?
Grazie a tutti ;)
PS: Vorrei sottolineare che la schermata appare solo quando collego il joistick per il resto il pc va benissimo!
PPS: se puo darvi una mano davanti ho 4 prese usb 2, 2.0 e 2, 3.0. Una volta mi è capitato un fatto strano, stavo passando dei file su un HDD esterno e ad un certo punto, il processo si è interrotto e non mi ha piu riconosciuto l hdd, anzi, non mi funzionava piu nessuna porta! poi riavviando e cercando di reinstallare driver mi sono tornate a funzionare solo due porte una 2.0 e una 3.0, poi poco tempo fa dopo l ennessima schermata blu e altri driver reinstallati tutte le porte hanno ripreso a funzionare, solo che la schermata ancora, a volte, si ripresenta!
PPPS: spero di non aver sbagliato sezione e mi scuso se mi sono dilungato un po troppo :)